MODEL B-25-1 through 4

MODEL B-25-1 through 4

Semi Automatic Horizontal - Twin Post Design Frame goes up at end of cut. All Model B-25's have the same capacity but as the blade size and horse power increase so does the length and strength of the frame to properly support the blade. The series 1 comes standard with a manually controlled blade force feed valve that insures a constant blade force throughout the cut. The series 2 and 3 have a hydraulic blade force valve that is controllable to a higher range that correspond to the loads of the 1 1/2" and 2" blades. The series 4 machine comes standard with positive feed that allows the head to descend at a fixed IPM rate. This is very desirable in those high production situations where a consistent type of material is to be cut by a knowledgeable operator.

Specifications	Model B 25-1	Model B 25-2	Model B 25-3	Model B 25-4
Cutting Capacity	16" H x 20" W 16" Round 16" H x 10" W @ 45°
Blade Drive	7 1/5 HP	10 HP	15 HP	15 HP
Blade Length	19'8"	23'6"	25'6"	25'6"
Carbide Guides	Yes	Yes	Yes	Yes
Guide Arm Positioned	Manual	Hyd	Hyd	Hyd
Flood Coolant	Yes	Yes	Yes	Yes
Sawing Force	30-120 lbs.	0-500 lbs.	0-500 lbs.	0-800 lbs.
Hydraulic Motor	2 HP	2 HP	2 HP	2 HP
Blade Tension	Manual	Hyd	Hyd	Hyd
Saw Vise	Manual	Hyd	Hyd	Hyd
Chip Conveyor	Opt	Opt	Opt	Hyd