|
Tannewitz
Metal Working Saws
TR Series Bandsaws
TR MODELS
TR1610/1610W
MODEL TR2014W/2012VW
MODEL TR2812VW
MODEL TR4014W/4012VW
G- Series High Production Saws
MODEL G1NE
MODEL GV1NE
MODEL GVTNE
MODEL RVTNE
MODELS S1NE, SV1NE, SVTNE
Plate Saws- Stainless,
Aluminum, Tool Steel
MODEL 3000 MT6
Auto Indexing Saws
MODEL 3000 MH8
MODEL 3600 MH6
MODEL 6024 MH
Wood Working Saws
Advantage Series
Model GHE36
B-11
Power Series
|
|
|
TANNEWITZ 3600 MH6
MOVING HEAD PLATE SAW WITH AUTO INDEXING
Specifications
|
Frame |
Heavy duty welded steel construction with 35-1/2" throat capacity |
Under Guide Capacity |
6" Standard (Other capacities available) |
Wheels |
Two (2) 36" diameter super rigid all steel wheel with heavy duty shafts and bearings |
Tires |
Tannewitz Speedi-change demountable tires with neoprene surface |
Guides |
All steel Tannewitz guides with carbide jaws. (1) Upper, (1) lower |
Guide Posts |
Hydraulically operated with column mounted controls, automatically maintains proper blade tension. Capable of tensioning a 1 1/2" x .050 blade to 30,000 PSI |
Band Widths |
Minimum 1", Maximum 2" |
Blade Speeds |
Variable from 55 to 350 SFPM (or any other 6:1 ratio) |
Blade Drive |
5 H.P. standard |
Rails |
Saw rides on hardened Thompson roundways, and has hydraulic feed travel and rapid return of 150". Feed Rate infinitely variable from .5" to 25" per minute |
Throat Table |
Has stock holding capacity of 24" (STD) |
Recirculating
Coolant System |
Standard. Complete with pump |
Hydraulic System |
5 H.P., 15 Gallon per minute hydraulic pump and reservoir to JIC spec. |
Electrical Specs
|
To NMTBA Standards, with 115 volt push-button circuitry,
NEMA 12 enclosures. |
Feed Table
|
Has the capability of holding a maximum piece of
6" x 40" W x 144" L (12,000 lb.) |
Bridge Clamps |
5 hydraulically actuated bridge clamps are standard for holding the work piece in position |
Automatic Computer
Controlled Index System |
This systems consists of three (3) hydraulically actuated rear
clamps that does not release the plate during cutting or indexing. This feature ensures the accuracy of repetitive cuts. The saw can be programmed to make up to 99 cuts of various widths. Saw will cut continually while the programmed number of cuts is being fulfilled. Also included is an interrupt option that permits a special cut to be made, and the saw automatically returns to the pre programmed cutting sequence. This programmable feature allows the saw the cut on its own without operator attendance.
|
|
|
